This Bruce West Cutaway Classical guitar, bearing the serial 16-1 and built during 2016 in Sterling, Ontario features a hundred year old Swiss Alpine Spruce top and Brazilian Rosewood sides and back. Like Bruce’s other guitars, this tie into an interesting and pivotal period of Canadian luthiery history.
Cutaway
This is a wonderful rarity. Built during 1953, this is an early Gibson ES-295 in good, clean and largely original condition, showing some honest finish wear and tear from real use over the decades. It’s easy to confuse the Gibson ES-295 with the classic ES-175, and there’s a good reason – they are the same guitar, but the ES-295 has a double gold finish and when introduced, two pickups instead of one.
The Gibson ES-175T is based on the classic full bodied ES175, but with sides just over half the thickness. This model appeared in Gibson Catalogs from 1976 to 1979. Before being discontinued, approximately 333 were shipped in the Natural finish seen here, Wine Red, and Sunburst.
This instrument has sold
MORE →The Gibson ES-350T (or ES-350TD to the early 1960s) is a thin-bodied, single cutaway fully hollow archtop electric built from 1955 to 1963 with a 23.5 inch scale length, and from 1977 to 1993 with a 25.5 inch scale. It started as the full-bodied, single-cutaway, 25.5 inch scale length single P-90 ES-350 Premiere in 1947. The ES-350 models were used by a number of top artists in the 1950s, most notably Chuck Berry. At introduction in 1955, the Gibson ES-350T shared several things with the also-new Byrdland, particularly the 23.5 inch scale length.
This instrument has sold
MORE →This Alberico OM Cutaway guitar was built during 2002 in beautiful Caledon Ontario, using Sitka Spruce, Indian Rosewood, Mahogany and Ebony. Fabrizio Alberico has been building for many years, and in the late 1990s learned from Sergei de Jonge. From 200 to 2004, he built guitars in Caledon, then returned to BC and ultimately to his current shop in Ladysmith.
This instrument has sold
MORE →The Gibson Howard Roberts Fusion III, the last iteration of the Howard Roberts models, appeared in 1991 and was built until the model was discontinued around 2010, though it went out of production between 2003 and 2005. The first Fusion models appeared in 1979. Here we’re looking at a Gibson Howard Roberts Fusion III dating to June 12 1995 and built at Gibson’s Nashville plant. This example carries a gloss red finish with gold plated parts, and is in very good, condition.
This instrument has sold
MORE →