Custom Shop

❌SOLD❌ Gibson Custom CS356 Thinline Faded Cherry, 2008

On January 25, 2021 /

The Gibson Custom CS356 was the top level version of the Gibson Custom CS336, and was built from 2002 to 2008. Like the CS-336, it was based on a carved Solid Figured Maple top on a chambered single-piece block of Mahogany, routed out to provide the sides, back, center block and tone chambers. Based on its 5-digit serial number with an 8 as its first digit, this example dates to 2008 and as such would be one of the last built. It has very little wear, and is in great condition with only a few minor bumps.

Used

Price: $4,999.99 CAD

This instrument has sold

❌SOLD❌ Fender Jeff Beck Stratocaster Surf Green, 2009

On January 23, 2021 /

The Fender Jeff Beck Stratocaster, built since 1991, honors one of the more innovative and versatile rock guitarists. Jeff Beck has been working since the early 1960s and has appeared on countless stages and recordings.
Drawing from a standard model, the Fender Jeff Beck Stratocaster features an Alder body and Maple neck with Rosewood fingerboard. However, in the interests of stage performance and tuning stability, this model also features locking (Sperzel) tuners, an LSR Roller nut, two-point trem and hot Noiseless pickups.

Used

Price: $3,399.00 CAD $4,250.00 CAD

This instrument has sold

❌SOLD❌ Gibson Flying V 67 Reissue Tobacco Burst, 1990

On January 19, 2021 /

Built from 1990 into 2014, the Gibson Flying V 67 Reissue had several names as it turned into a regular production model. All of these followed the same construction and design, using a solid Mahogany body and neck with an Indian Rosewood fingerboard, a pair of humbucking pickups and a stop tail piece – ABR bridge combination.

Used

Price: $1,850.00 CAD

This instrument has sold

❌SOLD❌ Fender Purple Sparkle Telecaster Custom Shop, 2003

On January 15, 2021 /

This Fender Purple Sparkle Telecaster was built during 2003 at Corona California Custom Shop and aside from the spectacular finish features a 50’s profile Birds-Eye Maple neck! Drawing from the popularity of wild automotive finishes in the 1950’s and 1960’s, Fender has offered many custom finishes, some based on the ‘Candy’ concept of using a metal-flake base layer with a translucent colour over top.

Used

Price: $4,000.00 CAD

This instrument has sold

Huss & Dalton TOMR Custom

On December 18, 2020 /

Here we have a new Huss & Dalton TOMR Custom featuring a Thermo-Cured Sitka Spruce top and Indian Rosewood back and sides! The model name breaks down to Traditional Orchestra Model Rosewood. On this guitar, the Custom refers to the choice of the thermo-cured Sitka top; it’s also available with an Adirondack or Red Spruce top, and without the thermo-cure. Thermo-cured wood is also known as baked, torrefied, and by Martin as part of their VTS (vintage tone system). The process uses controlled, high heat, atmospheric pressure and minimal oxygen and simulates aging.

New

Price: $4,375.00 USD

Huss & Dalton T0014 Rosewood Steel String Guitar

On November 27, 2020 /

Here’s a beautiful new Huss & Dalton T0014 Rosewood, part of the Traditional series and here seen with a Rosewood rather than Mahogany body. The top of the Huss & Dalton T0014 Rosewood is Sitka Spruce and the neck is Mahogany, with Ebony for the bridge and unbound fingerboard. The headplate is Indian Rosewood, and there are no electronics installed – this guitar is entirely acoustic.

New

Price: $4,337.00 USD

Custom Shop

❌SOLD❌ Gibson Custom CS356 Thinline Faded Cherry, 2008

❌SOLD❌ Fender Jeff Beck Stratocaster Surf Green, 2009

❌SOLD❌ Gibson Flying V 67 Reissue Tobacco Burst, 1990

❌SOLD❌ Fender Purple Sparkle Telecaster Custom Shop, 2003

Huss & Dalton TOMR Custom

Huss & Dalton T0014 Rosewood Steel String Guitar

THE TWELFTH FRET

MORE SERVICES

STAY CONNECTED